ਚੈਨ ਰੂਪਾਂਤਰਣ ਲਈ ਮਿਕ੍ਰੋਇੰਚ

ਚੈਨ ਰੂਪਾਂਤਰਣ ਲਈ ਮਿਕ੍ਰੋਇੰਚ ਕਨਵਰਟਰ ਕੈਲਕੁਲੇਟਰ

ਮਿਕ੍ਰੋਇੰਚ ਨੂੰ ਚੈਨ (ਇਕਾਈਆਂ ਬਦਲੋ)

1µin = 0ch

ਨੋਟ: ਤੁਸੀਂ ਇਸ ਜਵਾਬ ਦੀ ਸਹੀਤਾ ਨੂੰ ਵਧਾ ਜਾਂ ਘਟਾ ਸਕਦੇ ਹੋ, ਜਦੋਂ ਤੁਸੀਂ ਨਤੀਜੇ ਤੋਂ ਉੱਪਰ ਵਾਲੇ ਚੋਣਾਂ ਤੋਂ ਮਹੱਤਵਪੂਰਨ ਅੰਕਾਂ ਦੀ ਗਿਣਤੀ ਕਰਦੇ ਹੋ।

ਮਿਕ੍ਰੋਇੰਚ ਤੋਂ ਚੈਨ ਕਨਵਰਟ ਸੂਤਰ

ਚੈਨ = ਮਿਕ੍ਰੋਇੰਚ / 792001947.30998

ਮਿਕ੍ਰੋਇੰਚ ਤੋਂ ਚੈਨ ਗਣਨਾ

ਚੈਨ = ਮਿਕ੍ਰੋਇੰਚ / 792001947.30998

ਚੈਨ = 1 / 792001947.30998

ਚੈਨ = 0

What is a microinch?

A microinch is a unit of measurement used to express extremely small distances or dimensions. It is derived from the inch, which is a commonly used unit of length in the United States and a few other countries. The prefix "micro" denotes a factor of one millionth, so a microinch is equal to one millionth of an inch.

The microinch is primarily used in industries that require precise measurements, such as engineering, manufacturing, and machining. It allows for more accurate and detailed specifications, especially when dealing with very small tolerances. For example, in the manufacturing of electronic components or microchips, where even the tiniest variations can have a significant impact on performance, the microinch is a crucial unit of measurement.

To put it into perspective, one microinch is equivalent to 0.000001 inches or 0.0254 micrometers. It is important to note that the microinch is not commonly used in everyday life or in most countries outside of the United States. Instead, the metric system, which uses units like millimeters or micrometers, is more widely adopted. However, in specialized industries where precision is paramount, the microinch remains a valuable unit for expressing minute measurements.

What is a chain?

The chain is a unit of length measurement commonly used in surveying and land measurement. It is primarily used in countries that follow the imperial system of measurement, such as the United States and the United Kingdom. One chain is equal to 66 feet or 20.1168 meters. It is further divided into 100 links, with each link measuring 0.66 feet or 7.92 inches.

The chain was historically used for measuring large areas of land, such as farms or estates. Surveyors would use chains to measure distances between points and establish boundaries. The use of chains allowed for more accurate measurements compared to other methods available at the time. Today, the chain is still used in some specialized fields, such as civil engineering and land surveying, although it has been largely replaced by more modern and precise measurement tools like GPS.

 

ਮਿਕ੍ਰੋਇੰਚ ਤੋਂ ਚੈਨ ਸਾਰਣੀ

ਸ਼ੁਰੂਆਤੀ ਮੁੱਲ
ਵਾਧਾ
ਸਹੀਤਾ
ਮਿਕ੍ਰੋਇੰਚ
ਚੈਨ
0µin
0.00000ch
1µin
0.00000ch
2µin
0.00000ch
3µin
0.00000ch
4µin
0.00000ch
5µin
0.00000ch
6µin
0.00000ch
7µin
0.00000ch
8µin
0.00000ch
9µin
0.00000ch
10µin
0.00000ch
11µin
0.00000ch
12µin
0.00000ch
13µin
0.00000ch
14µin
0.00000ch
15µin
0.00000ch
16µin
0.00000ch
17µin
0.00000ch
18µin
0.00000ch
19µin
0.00000ch
ਮਿਕ੍ਰੋਇੰਚ
ਚੈਨ
20µin
0.00000ch
21µin
0.00000ch
22µin
0.00000ch
23µin
0.00000ch
24µin
0.00000ch
25µin
0.00000ch
26µin
0.00000ch
27µin
0.00000ch
28µin
0.00000ch
29µin
0.00000ch
30µin
0.00000ch
31µin
0.00000ch
32µin
0.00000ch
33µin
0.00000ch
34µin
0.00000ch
35µin
0.00000ch
36µin
0.00000ch
37µin
0.00000ch
38µin
0.00000ch
39µin
0.00000ch
ਮਿਕ੍ਰੋਇੰਚ
ਚੈਨ
40µin
0.00000ch
41µin
0.00000ch
42µin
0.00000ch
43µin
0.00000ch
44µin
0.00000ch
45µin
0.00000ch
46µin
0.00000ch
47µin
0.00000ch
48µin
0.00000ch
49µin
0.00000ch
50µin
0.00000ch
51µin
0.00000ch
52µin
0.00000ch
53µin
0.00000ch
54µin
0.00000ch
55µin
0.00000ch
56µin
0.00000ch
57µin
0.00000ch
58µin
0.00000ch
59µin
0.00000ch
ਮਿਕ੍ਰੋਇੰਚ
ਚੈਨ
60µin
0.00000ch
61µin
0.00000ch
62µin
0.00000ch
63µin
0.00000ch
64µin
0.00000ch
65µin
0.00000ch
66µin
0.00000ch
67µin
0.00000ch
68µin
0.00000ch
69µin
0.00000ch
70µin
0.00000ch
71µin
0.00000ch
72µin
0.00000ch
73µin
0.00000ch
74µin
0.00000ch
75µin
0.00000ch
76µin
0.00000ch
77µin
0.00000ch
78µin
0.00000ch
79µin
0.00000ch