Millimeters to US Nautical Miles

Millimeters to US Nautical Miles conversion calculator

US Nautical Miles to Millimeters (Swap units) Buy tape measures here (sponsored link)

1mm = 0US nmi

Note: You can increase or decrease the accuracy of this answer by selecting the number of significant figures required from the options above the result.

Millimeters to US Nautical Miles formula

US Nautical Miles = Millimeters / 1851851.8518519

Millimeters to US Nautical Miles calculation

US Nautical Miles = Millimeters / 1851851.8518519

US Nautical Miles = 1 / 1851999.3258722

US Nautical Miles = 0

What is a millimeter?

A millimeter is a thousandth of a meter (1/1000) which is the SI (International System of Units) unit of length. It is normally used to measure small lengths like the thickness of a sheet of paper or the dimensions of a small object.

One millimeter is approximately equal to 0.03937 inches (about 1/25th). Presicely there are 25.4 millimeters in an inch and it is often used in science and engineering. It is used in countries that have adopted the metric system.

You may come across millimeters when measuring the size of electronic components, jewelry or even the thickness of a fingernail.

What is a US Nautical Mile?

A US nautical mile is a unit of measurement used primarily in navigation and marine activities. It is defined as exactly 1,852 meters or approximately 6,076.12 feet. The term "nautical mile" originated from the need for sailors to measure distances on the Earth's surface while taking into account the curvature of the Earth.

The US nautical mile is based on the international nautical mile, which was established in 1929 by the International Hydrographic Organization (IHO). The IHO defined the nautical mile as one minute of latitude along any meridian. Since the Earth is not a perfect sphere, the length of a nautical mile varies slightly depending on the latitude. However, for practical purposes, the US nautical mile is considered a fixed value.

The US nautical mile is commonly used in marine charts, navigation systems, and aviation. It provides a convenient and standardized way to measure distances at sea, ensuring accurate calculations for ship and aircraft navigation. Additionally, it is used in the calculation of speed over water, known as knots, where one knot is equal to one nautical mile per hour.

 

Millimeters to US Nautical Miles table

Starting value
Increment
Accuracy
Millimeters
US Nautical Miles
0mm
0.00000US nmi
1mm
0.00000US nmi
2mm
0.00000US nmi
3mm
0.00000US nmi
4mm
0.00000US nmi
5mm
0.00000US nmi
6mm
0.00000US nmi
7mm
0.00000US nmi
8mm
0.00000US nmi
9mm
0.00000US nmi
10mm
0.00001US nmi
11mm
0.00001US nmi
12mm
0.00001US nmi
13mm
0.00001US nmi
14mm
0.00001US nmi
15mm
0.00001US nmi
16mm
0.00001US nmi
17mm
0.00001US nmi
18mm
0.00001US nmi
19mm
0.00001US nmi
Millimeters
US Nautical Miles
20mm
0.00001US nmi
21mm
0.00001US nmi
22mm
0.00001US nmi
23mm
0.00001US nmi
24mm
0.00001US nmi
25mm
0.00001US nmi
26mm
0.00001US nmi
27mm
0.00001US nmi
28mm
0.00002US nmi
29mm
0.00002US nmi
30mm
0.00002US nmi
31mm
0.00002US nmi
32mm
0.00002US nmi
33mm
0.00002US nmi
34mm
0.00002US nmi
35mm
0.00002US nmi
36mm
0.00002US nmi
37mm
0.00002US nmi
38mm
0.00002US nmi
39mm
0.00002US nmi
Millimeters
US Nautical Miles
40mm
0.00002US nmi
41mm
0.00002US nmi
42mm
0.00002US nmi
43mm
0.00002US nmi
44mm
0.00002US nmi
45mm
0.00002US nmi
46mm
0.00002US nmi
47mm
0.00003US nmi
48mm
0.00003US nmi
49mm
0.00003US nmi
50mm
0.00003US nmi
51mm
0.00003US nmi
52mm
0.00003US nmi
53mm
0.00003US nmi
54mm
0.00003US nmi
55mm
0.00003US nmi
56mm
0.00003US nmi
57mm
0.00003US nmi
58mm
0.00003US nmi
59mm
0.00003US nmi
Millimeters
US Nautical Miles
60mm
0.00003US nmi
61mm
0.00003US nmi
62mm
0.00003US nmi
63mm
0.00003US nmi
64mm
0.00003US nmi
65mm
0.00004US nmi
66mm
0.00004US nmi
67mm
0.00004US nmi
68mm
0.00004US nmi
69mm
0.00004US nmi
70mm
0.00004US nmi
71mm
0.00004US nmi
72mm
0.00004US nmi
73mm
0.00004US nmi
74mm
0.00004US nmi
75mm
0.00004US nmi
76mm
0.00004US nmi
77mm
0.00004US nmi
78mm
0.00004US nmi
79mm
0.00004US nmi